Pre-amps


A12,Accessories,Amateur,Amateur Radio,amp,Antenna Analysers,Aviation,Aviation ,B12,Baluns,Barenco Antenna Hardware,Chertsey,Coax Connections,Coaxail Cable,Commercial Two-Way Radio,DC Cable,diamond,DMAX,Dummy Loads,Duplexcers,ELAD,Gift Vouchers Insulators,Ham ,Headphones,Icom Aerial Tuning Units,jim,Linear Amplifiers,Marine,Martin Lynch,Microphones,ML&S,Mobile Antenna Mounts,Morse Keys,Poles,pre-amp,Pre-amps,Radio,Speakers

Product:  Diamond DMAX-40
E-mail Friend Print Product 
Diamond DMAX-40
Diamond Low Noise Preamplifier 500kHz - 1500MHz

A very useful receiver preamplifier in the same type of box as the Duplexers and Triplexers. Will enhance signal performance for both receivers and scanners. Has a variable gain control. Power is obtained from either a suitable 12V DC power supply or through a cigarette lighter plug which has a 2.1 in-line socket

People who bought this item also bought:
1. Diamond CX-210A
2. Diamond D-777
3. Adaptor - BNC Male to SO-239

Price: £74.95 (€95.94) Including VAT at 17.5%
Ex-VAT Price: £63.79 (€81.65)
 

Product:  Jim M-75 Preamp
E-mail Friend Print Product 
Jim M-75 Preamp
High quality pre-amp with variable gain control and band pass filters to minimise interference.
Switchable bands covering 24MHz-2.4GHz. Can be battery powered from an internal 9V PP3, or external 12V DC.

People who bought this item also bought:
1. MyDEL AS1105
2. MyDEL BS1100-KIT-A
3. Kinetic-Avionic SBS-1 MK2

Price: £69.95 (€89.54) Including VAT at 17.5%
Ex-VAT Price: £59.53 (€76.20)
 

Product:  ELAD A12-1090 + BT12
E-mail Friend Print Product 
ELAD A12-1090 + BT12
The A12-1090 is a pre-amplifier designed specially for the Virtual Radar SBS-1. The Mast Head Pre-amp amplifier increases the range of the SBS-1 considerably. The A12-1090 can be used with any passive antenna like the BS1100 series.

Package includes B12-1090BT Interface. To supply the A12-1090 pre-amp with power the 12V DC voltage is injected over the coaxial cable. This is supplied via the BT12 interface. The A12-1090BT offers two N-Type connectors (female), the BT12 interface has one N-Type input socket (feed from the masthead A12-1090) and one BNC (to the SBS-1).

Please note:

12VDC. is required to power the BT12 and two patch cables, one from the mast head to the antenna, the other from the interface to the SBS-1. The complete package can be ordered below which includes the A12-1090+BT12, 12V DC supply & both patch leads.

View PDF

People who bought this item also bought:
1. Maldol GDX-30 Discone
2. Icom IC-R1500
3. Kinetic-Avionic SBS-1 MK2

Price: £139.95 (€179.14) Including VAT at 17.5%
Ex-VAT Price: £119.11 (€152.46)
 

Product:  ELAD A12-1090 + BT12-Kit
E-mail Friend Print Product 
ELAD A12-1090 + BT12-Kit
Same as above but including two patch leads & psu.

The A12-1090 is a pre-amplifier designed specially for the Virtual Radar SBS-1. The Mast Head Pre-amp amplifier increases the range of the SBS-1 considerably. The A12-1090 can be used with any passive antenna like the BS1100 series.

The total package includes B12-1090BT Interface. To supply the A12-1090 pre-amp with power the 12V DC voltage is injected over the coaxial cable. This is supplied via the BT12 interface. The A12-1090BT offers two N-Type connectors (female), the BT12 interface has one N-Type input socket (feed from the masthead A12-1090) and one BNC (to the SBS-1).

A 12VDC. is supplied to power the BT12 and two patch cables, one from the mast head to the antenna, the other between the interface to the SBS-1.

View PDF

People who bought this item also bought:
1. MyDEL BS1100
2. MyDEL BS1100 Cable Kits
3. Kinetic-Avionic SBS-1 MK2

Price: £189.95 (€243.14) Including VAT at 17.5%
Ex-VAT Price: £161.66 (€206.92)
 

Telephone ML&SSBS-1 from Kinetic

New Weather Station

AT715-USB  New! 5-in-one Charger


MyDEL Products
Nifty - Mini Manuals
LDG Electronics Products