DX Engineering Antenna Accessories, ML&S Martin Lynch and Sons Ltd

Product Sections

See what our customers have to say on our comments page.

PDF Downloads

Download PDF Leaflets, Brochures and Manuals

DX Engineering Antenna Accessories

ML&S Store ¦ Accessories (By Manufacturer) ¦ DX Engineering Antenna Accessories

accessories,adonis,airnav,alpha delta,Amateur,antenna,AOR,Aviation,avionic,balun,barenco,bonito,buddipole,Commercial Two-Way Radio,communications,diamond,dx,DX Engineering,dx engineering,DX Engineering,engineering,Ham ,Heil,Hustler,hustler,Icom,Kenwood,Kinetic,LDG,manufacturer,Marine,Martin Lynch,MFJ,mydel,palstar,peet bros,PMR,Radio,receiver,rig,sommerckamp,sommerkamp,technology driver solutions,transceiver,yaesu

Product: DXE-AOK-17M

The DX Engineering DXE-AOK-17M kit adds 17 meter coverage to the Hustler BTV series of vertical antennas without giving up any existing band coverage. This kit will operate across the entire 17m band with an SWR of 1.5:1 or less.

No disassembly of the existing antenna is required, simply bolt this kit over the 10m trap, make some minimal tuning adjustments and you're on the air with an additional band.

People who bought this item also bought:

1. Icom MB-72

2. Icom BC-155A/D

3. Icom BP-228

Price: £49.95 (€63.94) Including VAT at 17.5%
Ex-VAT Price: £42.51 (€54.41)

Product: DXE-ARAV-1P

The DX Engineering’s Active Receive Antenna system offers excellent receiving performance from 100 kHz to 30 MHz using a whip antenna element 102 in. long. DX Engineering’s unique design makes it vastly superior to traditional active antennas in both strong signal handling and feedline decoupling. You get significantly better weak signal reception due to lower spurious signal interference and reduced noise. This antenna system is ideal for Amateur Radio or Shortwave Listening.

This item is delivered in two boxes. The courier charge for this item is £20 (mainland UK, other areas may be different cost - you will be notified by e-mail if this is the case)

People who bought this item also bought:

1. Plug - PL-259

2. RG-213U Coax

3. MyDEL CG-3000

Price: £259.95 (€332.74) Including VAT at 17.5%
Ex-VAT Price: £221.23 (€283.17)

Product: DXE-BAL050-H10-A

	DX Engineering High Power Transmission Line Transformers and Baluns with Maxi-CoreTM Technology, allows your antenna perform to its full potential and reduces the stresses on your equipment. The DX Engineering DXE-BAL050-H10-A is a 1.8 - 30 MHz 1:1 High Power (5kW Continuous/10kW Peak) balun. Price: £121.55 (€155.58) Including VAT at 17.5% Ex-VAT Price: £103.45 (€132.42)

Product: DXE-BAL050-H10-AT

	DX Engineering High Power Transmission Line Transformers and Baluns with Maxi-CoreTM Technology, allows your antenna perform to its full potential and reduces the stresses on your equipment. The DX Engineering DXE-BAL050-H10-AT is a 1.8 - 30 MHz 1:1 High Power (5kW Continuous/10kW Peak) balun built for use with an antenna tuner. Price: £147.16 (€188.36) Including VAT at 17.5% Ex-VAT Price: £125.24 (€160.31)

Product: DXE-BAL050-H11-CT

	DX Engineering High Power Transmission Line Transformers and Baluns with Maxi-CoreTM Technology, allows your antenna perform to its full potential and reduces the stresses on your equipment. The DX Engineering DXE-BAL050-H11-CT is a 1.8 - 30 MHz 1:1 High Power (10kW Plus) balun built for use with an antenna tuner. Price: £179.16 (€229.32) Including VAT at 17.5% Ex-VAT Price: £152.48 (€195.17)

Product: DXE-BAL200-H10-AT

	DX Engineering High Power Transmission Line Transformers and Baluns with Maxi-CoreTM Technology, allows your antenna perform to its full potential and reduces the stresses on your equipment. The DX Engineering DXE-BAL200-H10-AT is a 1.8 - 30 MHz 4:1 High Power (5kW Continuous/10kW Peak) balun. Price: £153.56 (€196.56) Including VAT at 17.5% Ex-VAT Price: £130.69 (€167.28)

Product: DXE-BAL050-H10-CT

	DX Engineering High Power Transmission Line Transformers and Baluns with Maxi-CoreTM Technology, allows your antenna perform to its full potential and reduces the stresses on your equipment. The DX Engineering DXE-BAL200-H10-CT is a 1.8 - 30 MHz 4:1 High Power (10kW Plus) balun built for use with an antenna tuner. Price: £179.16 (€229.32) Including VAT at 17.5% Ex-VAT Price: £152.48 (€195.17)

Product: DXE-BDAB-1P

This mounting kit allows you to mount a DX Engineering Balun, Feed Line Current Choke, or Vertical Feedline Current Choke in a wire dipole situation.

Kit includes:
- Polymer Dipole mounting bracket
- Stainless steel mounting hardware

People who bought this item also bought:

1. DXE-VFCC-H05-A

2. DXE-TB-3P

Price: £10.16 (€13.00) Including VAT at 17.5%
Ex-VAT Price: £8.65 (€11.07)

Product: DXE-BMB-2P

	This handy Aluminum mounting bar and Stainless Steel hardware kit will allow you to mount your quality DX Engineering Balun, Feed Line Current Choke, or Vertical Feedline Current Choke, directly to a 1.56 in. thru 2.25 in. boom. Works with any DX Engineering Formed Aluminum Enclosure Kits includes: - 1x - Mounting Bracket - 1x - Bracket Hardware Kit - 2x - Boom Clamps Price: £16.02 (€20.51) Including VAT at 17.5% Ex-VAT Price: £13.63 (€17.45)

Product: DXE-CAVS-1P

	This V-Clamp is made in one size that fits tubing from 1/2 to 1-3/4'' O.D. as used in antenna construction. The supplied V-bolt is long enough to attach tubing to thick plates and is made with anti-corrosive properties. The as-cast rippled surface of the saddle will clamp the tubing securely to a flat surface. Price: £14.56 (€18.64) Including VAT at 17.5% Ex-VAT Price: £12.39 (€15.86)

Product: DXE-CSB-COMBO

	Ferrite Beads in a Split Carrier, Combo Pack - Assorted Pack of 8. - Reduce or eliminate ignition/injector noise - 3 S-units improvement not uncommon! - Hear many more stations - 31-mix is optimal for HF - Snaps on - no cutting - Mobile or home use - any RFI application Price: £52.59 (€67.32) Including VAT at 17.5% Ex-VAT Price: £44.76 (€57.29)

Product: DXE-EGK-200

	The DX Engineering DXE-EGK-200 is a 2" Grounding Exhaust Kit. Price: £18.87 (€24.15) Including VAT at 17.5% Ex-VAT Price: £16.06 (€20.56)

Product: DXE-FCC050-H05-A

	The DXE-FCC050-H05-A Feedline Current Choke, using Maxi-Core® technology, prevents unwanted RFI by eliminating feedline current and radiation in 50 Ohm, coaxially fed antenna systems. It provides excellent feedline decoupling and low loss performance from 1 to 60 MHz and is power rated for 2 kW continuous, 5 kW intermittent. The FCC has significantly higher common mode impedance and a larger effective core area than similar line isolators, including conventional enameled wire or bead baluns. Price: £102.34 (€131.00) Including VAT at 17.5% Ex-VAT Price: £87.10 (€111.49)

Product: DXE-HR-1P

	The DX Engineering Hot Rodz™ is an adjustable capacity hat system that increases the efficiency and gain of single-band vertical antennas, such as those from Hustler and Pro Am. Hot Rodz can even shorten the height of the antenna by eliminating the need for a whip. Hot Rodz can also be used on the Hustler 4, 5 and 6-BTV Series antennas by experienced antenna practitioners. Price: £54.63 (€69.93) Including VAT at 17.5% Ex-VAT Price: £46.49 (€59.51)

Product: DXE-MM-1

	The MM-1 is a dual ratio UN-UN (unbalanced to unbalanced transformer). Great for coupling your 50 Ohm coax to an antenna with a feed point impedance of either 25 or 12.5 Ohms, typically found in a mobile environment. Price: £109.66 (€140.36) Including VAT at 17.5% Ex-VAT Price: £93.33 (€119.46)

Product: DXE-RADP-1P

The DXE-RADP-1P is a Plate, Stainless Steel w/ 20 Sets of SS Radial Attachment Hardware.

The DX Engineering Radial Plate is meant for those of you that have or are building a quarter wave vertical antenna and who want an easy, neat and effective way to connect those essential radial wires and the coax to your vertical antenna for the lowest takeoff angle and strongest signals.

This plate will work perfectly with most commercially available vertical antennas such as the Hustler BTV series (4BTV thru the 6BTV), the SteppIR (BiggIR or SmallIR) or one of your own construction.

People who bought this item also bought:

1. Snap Hook 8 x 80mm - BE923/80

2. Alpha Delta CIN

3. 9" Wall Bracket - BE715/09

Price: £73.09 (€93.56) Including VAT at 17.5%
Ex-VAT Price: £62.20 (€79.62)

Product: DXE-RR8-HP-P

	The DXE-RR8-HP is the smallest antenna switch in the DX Engineering RR8 series. It is designed to switch up to 8 coaxial lines in low to medium power RF systems. Sealed relays provide exceptional performance and are moisture resistant. The RR8-HP can be configured to simultaneously select multiple output ports as well as conventional one-of-eight antenna switching. This allows the RR8-HP to be used in complex antenna phasing and stacking systems as well as traditional switching arrangements. Price: £329.95 (€422.34) Including VAT at 17.5% Ex-VAT Price: £280.81 (€359.44)

Product: DXE-SAD-200A

	These Saddle Clamps are made in sizes that fit thick wall tubing, used in antenna construction not like clamps found at your typical automotive sources. The supplied U-bolt is long enough to attach tubing to thick plates and is made with anti-corrosive properties and will grip securely to the tubing. U-Bolt thread dimensions: 5/16"-18 x 1.12 Price: £13.61 (€17.42) Including VAT at 17.5% Ex-VAT Price: £11.58 (€14.82)

Product: DXE-TB-3P

The DX Engineering DXE-TB-3P is a Tilt Base Kit for 1/4 wave Hustler 4, 5 & 6 BTV Verticals.

With a DX Engineering Tilt Base, operators can raise or lower their BTV vertical in seconds while leaving the base plate securely attached to the mounting pipe or post. One person can service the antenna—no more climbing ladders or removing brackets.

People who bought this item also bought:

1. DXE-BDAB-1P

2. DXE-VFCC-H05-A

Price: £87.06 (€111.44) Including VAT at 17.5%
Ex-VAT Price: £74.09 (€94.84)

Product: DX-UT8000-P

	The DX-UT8000-P prepares RG-8, or RG-213 coax cable for installation of a PL-259 connector. - For foam or solid dielectric cable preparation - Precision, two-step operation - No nicks or scratches to conductor - Includes 2 replacement blades Price: £58.44 (€74.80) Including VAT at 17.5% Ex-VAT Price: £49.74 (€63.67)

Product: DXE-VFCC-H05-A

The DX Engineering DXE-VFCC-H05-A is a 2/5 kW Vertical Feedline Current Choke.

If your antenna SWR is already low and you wish to reduce feedline radiation and improve reception, a Feedline Current Choke is recommended. Adding a DX Engineering Feedline Current Choke at the base of a vertical antenna will substantially reduce unwanted feedline radiation (RFI), reducing the need for improved station grounding.

People who bought this item also bought:

1. DXE-BDAB-1P

2. DXE-TB-3P

Price: £121.55 (€155.58) Including VAT at 17.5%
Ex-VAT Price: £103.45 (€132.42)

This website is best viewed in Internet Explorer 7, you are able to download it here. Best viewed in 800x600 or above screen resolution.
Terms & Conditions | Privacy Statement | Online Security | Site Map | Contact

We Accept These Credit Cards
Shopping online at ML&S is safe & secure. More info

Martin Lynch & Sons Ltd . Outline House . 73 Guildford Street . Chertsey . Surrey . KT16 9AS
Opening Hours: Monday to Friday - 9:00 to 5:30, Saturday - 9:30 to 5:00 Tel: +44 (0)845 2300 599 Fax: +44 (0) 1932 567 222 Email: